M280WD AIR Industrial Vacuum Rectangular Flat Foam Rubber Vacuum Cups for mounting the vacuum up

for mounting the vacuum up holder on the automation

- Suitable for all vacuum cups with male M5 support

water condensates or impurities from between the sheets of paper to be separated in the working environment

- A two-way manual valve for restoring the atmospheric pressure inside the filter- A radial vacuum gauge the direct reading of the level of vacuum- A magnetic level switch that stops the pump when the suctioned liquid exceeds the safety level- A rigid pipe connected to the service to convey the air flow and the sucked liquid to the bottom of the container- A check valve at the bottom of the filter to automatically drain the sucked liquid and impurities every time the atmospheric pressure is restored inside the filter- A cock applied on the aforementioned check valve for manual liquid drainage- A sturdy metal bracket for fixing the filter to the wall

M280WD AIR Industrial Vacuum Rectangular Flat Foam Rubber Vacuum Cups for mounting the vacuum upWet and dry vacuum cleaners, Compressed air M 280 WD AIR COMPRESSED AIR POWERED INDUSTRIAL WET AND DRY VACUUM CLEANER The 280 WD AIR is the ideal vacuum cleaner to vacuum liquids where the use of electricity is unavailable or not possible. The motor with 2 Venturi units uses available compressed air to vacuum up to 80 litres of liquids even mixed with dust, which can then be discharged in a few minutes via a convenient valve located on the back.