Pay in 4 interest-free payments of $32.50 Learn more
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
relative humidity 5%-95%
Spindle enable and direction
otherwise the LED is turned off when the output is low
This Analog Piezoelectric Ceramic Vibration Module buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration also known as ‘piezoelectric effect’
Voltage to PWM Converter Module 74573 relative humidity 5%-95%Introduction This is a pulse width (PWM) to voltage converter. It converts the PWM digital signals into 0 to 10V analog signals. It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is proportional to the duty ratio of the PWM. You can select the pulse width signal voltage level using a jumper. The PWM input level voltage can be selected from 4,5V to 10V (micro controller operating level) or from
US$ 15.00
US$ 17.00
US$ 34.00
US$ 39.00
US$ 15.00
US$ 11.00
US$ 10.00
US$ 26.00
US$ 12.00
US$ 24.00
US$ 39.00
US$ 28.00
US$ 12.00
US$ 13.00
US$ 15.00
US$ 10.00